---
title: "Enabling Connector Logging"
slug: "enabling-connector-logging"
updated: 2026-05-18T19:47:22Z
published: 2026-05-18T19:47:22Z
canonical: "help.nucleussec.com/enabling-connector-logging"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.nucleussec.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Enabling Connector Logging

1. Navigate to your project's **Connector Setup** page.
2. In the **Connectors** grid, locate the connector you want to debug.
3. In the **Actions** column, click the **Connector Logging** icon (document icon).
4. The **Connector Logging** dialog will open, displaying the connector name in the title (e.g., "Connector Logging – Tenable").
5. On the **Enable Logging** tab:
  - Enter the number of minutes you want logging to remain active in the **Minutes to Log** field. The default value is **60** minutes. You may enter any value between **1** and **1440** (24 hours).
  - Click **Enable Logging**.
  - Confirm the action in the confirmation prompt.
6. A success message will appear once logging is enabled.

![](https://cdn.document360.io/3888970a-6501-459e-acc9-c47b71c6d64c/Images/Documentation/image(561).png)

**Note:** When logging is enabled, any previously stored log entries for that connector are automatically purged to provide a clean capture window.

![](https://cdn.document360.io/3888970a-6501-459e-acc9-c47b71c6d64c/Images/Documentation/image(563).png)